BMW Navigation Portable Plus - Manual (Page 29)

BMW Navigation Portable Plus Owner’s Manual
Customizing the nüvi
E
N
Viewing Traffic Subscription
Information
Some BMW packages include traffic. Touch
Tools > Settings > Traffic .
noTe: For BMW packages that include
traffic, you can only access the traffic
settings if your nüvi is connected to the
BMW mount.
noTe: North American packages will
include a trial subscription, but the
subscription does not need to be activated.
Adding a Subscription
You can purchase additional subscriptions or
a renewal if your subscription expires. Go to
Garmin’s FM Traffic Web site at www.garmin
.com/fmtraffic .
1. From the Menu page, touch Tools >
Settings > Traffic .
2. Touch Subscriptions > Add .
3. Write down the FM traffic receiver’s unit
ID.
4. Go to www.garmin.com/fmtraffic to
purchase a subscription and get a 25-
character code.
5. Touch Next on the nüvi, enter the code,
and touch �one .
The traffic subscription code cannot be reused.
You must obtain a new code each time you renew
your service. If you own multiple FM traffic
receivers, you must obtain a new code for each
receiver.
Bluetooth Technology Settings
Touch Tools > Settings > Bluetooth .
Connections—select add > oK to pair with
a mobile phone that has Bluetooth wireless
technology. See page 11 . Select Change to
connect with a different device.
noTe: The nüvi’s PIN code (or passkey)
is 1234 .
Drop—select the phone you want to disconnect,
and touch Yes .
remove—select the phone you want to delete
from the nüvi’s memory, and touch Yes .
Bluetooth—enable and disable the Bluetooth
component. The Bluetooth icon appears on
the Menu page if the Bluetooth component is
enabled. To prevent a phone from automatically
connecting, select Disabled .
Friendly name — enter a friendly name that
identifies your nüvi on devices with Bluetooth
technology. Touch Done .
Troubleshoot—scroll through the list
containing compatible devices. If your phone is
not in this list, go to www.garmin.com/bluetooth
for more information.
restore—restore the original Bluetooth
settings. This does not clear the pairing
information.