I.R.I.S. IRIScan Pro 3 Wi-Fi Quick Start - Manual (Page 11)

Quick User Guide - English
11
7. Scanning Documents in PC Mode (Windows PC
only)
On a Windows PC the IRIScan
TM
Pro 3 Wifi can also be used as Twain scanner, meaning
you can use it to scan directly from software applications such as Readiris
TM
and Cardiris
TM
.
IMPORTANT: make sure you have installed the scanner's Twain driver. See Installing
the Software .
1. Connect the scanner to your computer using the USB cable.
2. Power on the scanner.
3. Press the SD/PC Wifi button once.
PC is now displayed on the LCD-display.
4. Load your documents into the scanner.
7.1 Scanning Documents in Readiris
TM
14
1. Start Readiris
TM
.
When you start Readiris
TM
for the first time you are asked to activate it. Click
Yes and enter the Activation code you find on the label inside the DVD
box. Then click OK.
Note that an internet connection is required to do the activation.
2. Click the down arrow below Scan, and click Settings.
3. Click Configure to select the Twain source.
4. Select IRIScan
TM
Pro Wifi 6.0 from the list, and click Select.
If the IRIScan
TM
is not listed here, it means the driver has not been installed
correctly.
5. Click Scanner Model and select IRIScan
TM
Pro 3 Wifi.
You can now configure the scanner settings in the Readiris
TM
dialog box.
Or select IRIScan
TM
Pro 3 Wifi (User Interface). In that case the Scanner
Properties dialog box opens before scanning. In that window you can
configure advanced scanner settings. See section 4.4 of the IRIScan
TM
Pro 3
Wifi User Guide on the DVD-ROM.
6. Click OK to close the scanner settings.
7. Then click Scan inside Readiris
TM
to scan your documents.