I.R.I.S. IScan Book 2 - Manual (Page 4)

4/6 Getting Started – English
Tips
Adding a timestamp to your images
Your IRIScan TM Book 2 scanner adds a timestamp to the images you scan. This way, you know exactly
when they where scanned.
To get a correct timestamp the Time Settings need to be set:
 Press the Scan button for 2 seconds to power on the scanner.
 Insert a pointy object, like a paper clip, into the Time set button:
1. Then press C/BW or DPI to change the (1) year. Press Scan to confirm
and move on to the (2) month.
2. Repeat step 1 for the (2) month, (3) date, (4) hour and (5) minutes.
Scanning small, thick books
When you’re scanning a small, thick book it may occur that the margin is too narrow and you’re not
able to scan the entire text.
You can solve this problem by scanning the pages horizontally and rotating your images with
Readiris
TM .
Another solution is to place the scanner at the bottom of the page, turn it upside down and scan
upwards. You’ll notice that the scanner’s right margin is smaller than the left.