I.R.I.S. Readiris 14 for Windows User Guide - Manual (Page 30)

Section 2: Getting Started
34
Note: If you selected an incorrect language by mistake, click
Ctrl+U inside Readiris. The Language dialog box opens and you
can select another language from the list.
C
ONFIGURING YOUR SCANNER
In order to scan documents in Readiris, your scanner must be
configured correctly.
Before you configure the scanner in Readiris:
1. Make sure your scanner is connected to your computer, and
switched on.
Note: the scanner should be physically connected to your
computer with a USB cable. An ethernet or wireless connection
may also be used if the Twain driver supplied by the
manufacturer has been engineered with that capability.
2. Make sure you have the latest available Twain driver installed for
your scanner.
In general, drivers can be found on the website of your scanner
manufacturer. They are not provided by I.R.I.S. Note that some
scanner drivers may not work under the latest versions of
Windows. See the documentation supplied with your scanner to