JLG 3248RS/10RS Operator Manual - Manual (Page 12)

SECTION 1 - SAFETY PRECAUTIONS
1-2 – JLG Lift – 3121272
1.2 PRE-OPERATION
Operator Training and Knowledge
• The Operation and Safety Manual must be read and understood
in its entirety before operating the machine. For clarification,
questions, or additional information regarding any portions of
this manual, contact JLG Industries, Inc.
• An operator must not accept operating responsibilities until ade-
quate training has been given by competent and authorized per-
sons.
• Allow only those authorized and qualified personnel to operate
the machine who have demonstrated that they understand the
safe and proper operation and maintenance of the unit.
• Read, understand, and obey all DANGERS, WARNINGS, CAUTIONS,
and operating instructions on the machine and in this manual.
• Ensure that the machine is to be used in a manner which is within
the scope of its intended application as determined by JLG.
• All operating personnel must be familiar with the emergency
controls and emergency operation of the machine as specified in
this manual.
• Read, understand, and obey all applicable employer, local, and
governmental regulations as they pertain to your utilization and
application of the machine.
Workplace Inspection
• Precautions to avoid all hazards in the work area must be taken
by the user before and during operation of the machine.
• Do not operate or raise the platform from a position on trucks,
trailers, railway cars, floating vessels, scaffolds or other equip-
ment unless the application is approved in writing by JLG.
• Before operation, check work area for overhead hazards such as
electric lines, bridge cranes, and other potential overhead
obstructions.
• Check floor surfaces for holes, bumps, drop-offs, obstructions,
debris, concealed holes, and other potential hazards.
• Check the work area for hazardous locations. Do not operate the
machine in hazardous environments unless approved for that
purpose by JLG.
• Ensure that the ground conditions are adequate to support the
maximum tire load indicated on the tire load decals located on
the chassis adjacent to each wheel.