Training supervision, Operator responsibility, 2 preparation, inspection, and maintenance – JLG 3248RS/10RS Operator Manual User Manual
Page 24: Training supervision -2 operator responsibility -2, Preparation, inspection, and maintenance -2
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-2
– JLG Lift –
3121272
Training Supervision
Training must be done under the supervision of a qualified person in an
open area free of obstructions until the trainee has developed the abil-
ity to safely control and operate the machine.
Operator Responsibility
The operator must be instructed that he/she has the responsibility and
authority to shut down the machine in case of a malfunction or other
unsafe condition of either the machine or the job site.
NOTE:
The Manufacturer or Distributor will provide qualified people for
training assistance with the first unit(s) delivered and from that
time forward as requested by the user or his/her personnel.
2.2
PREPARATION, INSPECTION, AND MAINTENANCE
Table 2-1 explains the periodic machine inspections and maintenance
recommended by JLG Industries, Inc. Consult local regulations for fur-
ther requirements for aerial work platforms. The frequency of inspec-
tions and maintenance must be increased as necessary when the
machine is used in a harsh or hostile environment, if the machine is
used with increased frequency, or if the machine is used in a severe
manner.