JLG 3248RS/10RS Operator Manual - Manual (Page 13)

SECTION 1 - SAFETY PRECAUTIONS
3121272 – JLG Lift – 1-3
• This machine can be operated in nominal ambient temperatures
of 0 o F to 104 o F (-20 o C to 40 o C). Consult JLG to optimize opera-
tion outside of this temperature range.
Machine Inspection
• Do not operate this machine until the inspections and functional
checks have been performed as specified in Section 2 of this
manual.
• Do not operate this machine until it has been serviced and main-
tained according to the maintenance and inspection require-
ments as specified in the machine’s Service and Maintenance
Manual.
• Ensure all safety devices are operating properly. Modification of
these devices is a safety violation.
MODIFICATION OR ALTERATION OF AN AERIAL WORK PLATFORM SHALL BE
MADE ONLY WITH PRIOR WRITTEN PERMISSION FROM THE MANUFACTURER.
• Do not operate any machine on which the safety or instruction
placards or decals are missing or illegible.
• Check the machine for modifications to original components.
Ensure that any modifications have been approved by JLG.
• Avoid accumulation of debris on platform deck. Keep mud, oil,
grease, and other slippery substances from footwear and plat-
form deck.
1.3 OPERATION
General
• Machine operation requires your full attention. Bring the
machine to a full stop before using any device, i.e. cell phones,
two-way radios, etc. that will distract your attention from safely
operating the machine.
• Do not use the machine for any purpose other than positioning
personnel, their tools, and equipment.
• Before operation, the user must be familiar with the machine
capabilities and operating characteristics of all functions.
• Never operate a malfunctioning machine. If a malfunction occurs,
shut down the machine. Remove the unit from service and notify
the proper authorities.
• Do not remove, modify, or disable any safety devices.
• Never slam a control switch or lever through neutral to an oppo-
site direction. Always return switch to neutral and stop before
moving the switch to the next function. Operate controls with
slow and even pressure.