6 serial number locations, Serial number locations -4, Lubrication specifications -5 – JLG 2658E3 Service Manual User Manual
Page 10

SECTION 1 - SPECIFICATIONS
1-4
– JLG Lift –
3120878
1.6
SERIAL NUMBER LOCATIONS
For machine identification, a serial number plate is affixed
to the machine. The serial number plate is located on the
left rear side of the machine frame, just above the left rear
tire and wheel assembly. In addition, if the serial number
plate is damaged or missing, the machine serial number is
stamped on the right front of the frame
TO AVOID PERSONAL INJURY, USE SAFETY PROP FOR ALL
MAINTENANCE REQUIRING PLATFORM TO BE ELEVATED.
NOTE: Operate lift function through one complete cycle
before checking oil level. Oil level should be at
the full mark or within 1.5 cm (0.5 in) below the
full mark.
Figure 1-1. Serial Number Location
Table 1-5. Lubrication Specifications
KEY
SPECIFICATIONS
MPG
Multipurpose Grease having a minimum dripping
point of 350° F. Excellent water resistance and adhe-
sive qualities, and being of extreme pressure type.
(Timken OK 40 pounds minimum)
EPGL
Extreme Pressure Gear Lube (oil) meeting API ser-
vice classification GL-5 or MIL-Spec MIL-L-2105
HO
Hydraulic Oil. API service classification GL-3,
e.g.Mobilfluid 424.