JLG E45A_AJ ANSI Service Manual - Manual (Page 66)

SECTION 2 - PROCEDURES
2-50 – JLG Lift – 3120765
Machine Personality Settings NOTE: Personality settings can be adjusted within the
adjustment range in order to achieve optimum
machine performance.
Table 2-5. Personality Ranges/Defaults
FUNCTION PERSONALITY RANGE DEFAULTS
DRIVE ACCELeration 0.5s to 5.0s 1.0
DECELeration 0.1s to 2.0s 0.5
MINimum speed 0 to 25% 3
MAXimum speed 0 to 100% 100
ELEVATED MAXimum speed 0 to 25% 20
10 for CE spec E45AJ
CREEP MAXimum speed 0 to 45% 30
POSITRAC time 0 to 60s 10
POSITRAC current 50-250 A 170A
LOWER LIFT ACCELeration 0.5 to 5.0s 1.0
DECELeration 0.0 to 3.0s 0.5
MINimum UP speed 0 to 30% 19
MAXimum UP speed 0 to 100% 95
MINimum DOWN speed 0 to 20% 7
MAXimum DOWN speed 0 to 100% 47
UPPER LIFT ACCELeration 0.5 to 5.0 2.0
DECELeration 0.1 to 3.0 1.0
MlNimum UP speed 0 to 20 9
MAXimum UP speed 0 to 100 67
CREEP Maximum UP speed 0 to 50 30
MINimum DOWN speed 0 to 10 2
MAXimum DOWN speed 0 to 100 40
CREEP maximum DOWN speed 0 to 30 10
Updated 10-7-99