JLG 4017 Eccupped for Platform Operator Manual - Manual (Page 42)

Section 2 - Pre-Operation and Controls
2-18 31200028
Display Screen
The display screen consists of five sections:
1. Speed Indicator (km/h)
2. Symbol Display
3. Engine Speed Indicator (rpm)
4. Operating Hours Indicator (Bh)
5. Boom Angle, Aux Hydraulic and Common Message Display
Symbol Display (Section 2)
a. Parking Brake
Displayed permanently when parking brake is applied (see
page 2-23). Parking brake must be applied to start engine.
Symbol will flash when parking brake is not applied and
attempting to start engine.
b. Glow Indicator
Displayed when ignition key is in position-1; engine
preheat. Symbol is shown until start temperature is
reached. After the symbol disappears, the engine can be
started, do not start before.
c. Diagnostic Startup
Displayed after system start, while startup diagnostic is in
progress. Symbol is shown until startup diagnostics has
been successfully completed. If the symbol does not
disappear, a failure has been detected within the
diagnosis. Stop engine immediately.
d. Engine Oil Pressure
Symbol displayed and buzzer sounds when low oil
pressure exists. Stop engine immediately.
OZ0030
4
0
km/h
0
718
12 ° P
1
min
5
3
1
2
P
OH2480
OU0040
OZ1150
OT1010