JLG 4017 Eccupped for Platform Operator Manual - Manual (Page 19)

Section 1 - General Safety Practices
1-9 31200028
Preparation and Setup
1. Check to ensure the personnel platform is securely attached at the Quick
Switch™. Follow installation procedure on page 4-7.
2. Ensure the telehandler is on a firm surface and is level.
3. Engage the park brake. Blocking the wheels is also recommended.
4. Level the platform, both side to side (frame sway) and front to back
(attachment tilt).
5. Keep area under the platform free from personnel.
6. DO NOT lift or carry persons in the bucket or on forks.
Never tilt the platform forward, rearward, or sway the machine when the platform is
occupied. Serious injury or death could result.