JLG 4017 Eccupped for Platform Operator Manual - Manual (Page 40)

Section 2 - Pre-Operation and Controls
2-16 31200028
Instrument Panel
1. Steer Mode Selection
LED lit while activated. Blinks during change to another steer mode.
See page 2-35 for details.
2. C Key
Returns user interface one level during navigation and deletes user inputs.
3. Up/Down Arrows
Scroll up and down in the user interface.
4. OK Key
Confirms user interface inputs.
5. Overload Protection Override
When the button is activated the LED lights and the buzzer sounds. The
automatic overload protection function (see page 2-32) is disabled. Push button
or cycle ignition switch to re-enable function.
6. Declutch Shutoff
With the LED not lit, the transmission is in neutral and all power is routed to the
hydraulic system when the service brake is depressed. Function is deactivated
when LED is lit.
WARNING
TIP OVER HAZARD. Exceeding lift capacity of the telehandler could damage the
equipment and/or cause tip over resulting in death or serious injury.
OZ0020
C OK
!
2
5
6
7
1
4
3
8
9
10
11
12