Brother P-TOUCH PT-1700 - Manual (Page 29)

-27-
This machine has a BIG size font in addition to the normal font. The normal size
font can be set at the standard size, W2 (double width), H2 (double height), 4
(double width & double height) and 8 (4
×
width & double height). If the BIG size
font is chosen, all other settings are cancelled.
To choose the BIG size font:
(1) Holding down the CODE key, press the BIG key. The display shows
“NORM” or “BIG”, whichever is the currently selected font size.
(2) Pressing the BIG key while holding down the CODE key toggles the displays.
(3) Release the CODE key when a desirable font size is selected on the display.
It will change as follows:
● When the BIG size font is selected, all lower case characters are
printed in upper case, and the settings for SIZE, STYLE and UNDL/
BOX are ignored.
● The BIG size font can only be set when tape with a 3/4” (18 mm)
width is used.
BIG SIZE FONT
CAPS STL UNDL/FRM
B I G
STL 1 W2 H2 4
CAPS UNDL/FRM
D : N O R M
STL 1 W2 H2 4
CAPS UNDL/FRM
D : N O R M
CAPS STL UNDL/FRM
N O R M
A A
A A A
A A
A A A
Note: