Drive limits -6 – JLG M4069 Operator Manual User Manual
Page 28
![background image](/manuals/551773/28/background.png)
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-6
– JLG Lift –
3121220
e. Ensure that all LED’s in the control box are work-
ing properly.
f. Check that the platform extension extends and
retracts properly.
3. With the platform in the stowed position:
a. Drive the machine on a grade, not to exceed the
rated gradeability, and stop to ensure the brakes
hold.
b. The red warning LED on the control panel indi-
cates the chassis is on a slope beyond the rated
limit from side to side and/or front to rear when
the platform is in the stowed position.
NOTE:
When the limits are exceeded, drive and lift-up functions
are cutout.
Table 2-2. Drive Limits
Model
High Drive
Cutout
Drive Cutout
Drive at Creep
Speed
3369LE/M3369
Above Stowed
N/A
N/A
4069LE/M4069
Above Stowed
30 ft (9.1 m)
N/A
M4069 (AUS Full Drive
Height Model)
Above Stowed
N/A
28 ft - 30 ft
(8.5 m - 9.1 m)
Table 2-3. Tilt vs. Height
Height
Tilt
Left - Right
Front - Back
3369LE/M3369 (ANSI/CE/Australia/Japan)
< 25 ft (7.6 m)
5°
5°
< 30 ft (9.1 m)
4°
5°
Full Height
3°
5°
3369LE/M3369 (CSA)
Full Height
3°
3°
3369LE/M3369 (CE) - 37 mph (16.7 m/s) wind-speed option
< 25 ft (7.6 m)
4°
5°
Full Height
2°
4°
4069LE/M4069 (ANSI/CE/Australia/Japan)
< 30 ft (9.1 m)
5°
5°
< 36 ft (11 m)
4°
5°
Full Height
3°
5°
4069LE/M4069 (CSA)
Full Height
3°
3°
4069LE (CE) - 37 mph (16.7 m/s) wind-speed option
< 30 ft (9.1 m)
5°
5°
Full Height
3°
5°