JLG M4069 Operator Manual - Manual (Page 26)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-4 – JLG Lift – 3121220
2.3 PRE-START INSPECTION
The Pre-Start Inspection should include each of the following:
1. Cleanliness – Check all surfaces for leakage (oil, fuel,
or battery fluid) or foreign objects. Report any leakage
to the proper maintenance personnel.
2. Structure - Inspect the machine structure for dents,
damage, weld or parent metal cracks or other discrep-
ancies.
3. Decals and Placards – Check all for cleanliness and
legibility. Make sure none of the decals and placards
are missing. Make sure all illegible decals and placards
are cleaned or replaced.
4. Operators and Safety Manuals – Make sure a copy of
the Operator and Safety Manual is enclosed in the
weather resistant storage container.
5. “Walk-Around” Inspection – Refer to Figure 2-1.,
Walk-Around Inspection (Sheet 1 of 3).
6. Battery – Charge as required.
7. Fuel - (Combustion Engine Powered Machines) – Add
the proper fuel as necessary.
8. Engine Oil Supply - Ensure that the engine oil level is
at the full mark on the dipstick and the filler cap is
secure
9. Fluid Levels - Be sure to check the engine oil and the
hydraulic oil levels.
10. Accessories/Attachments - Reference the Operator
and Safety Manual of each attachment or accessory
installed upon the machine for specific inspection,
operation, and maintenance instructions.
11. Function Check – Once the “Walk-Around” Inspection
is complete, perform a functional check of all systems
in an area free of overhead and ground level obstruc-
tions. Refer to Section-4 for more specific instructions
on the operation of each function.
Parent Metal Crack
Weld Crack