JLG 500RTS ANSI Service Manual - Manual (Page 10)

SECTION 1 - SPECIFICATIONS
1-2 – JLG Sizzor – 3121103
Hydraulic Filter - Inline
Return - Bypass Type
25 Micron Nominal
1.3 PERFORMANCE DATA
Travel Speed
2 Wheel Drive - 3.5 mph (5.6 kmh)
4 Wheel Drive - 2.8 mph (4.5 kmh)
Gradeability
2 Wheel Drive - 25% (14°)
4 Wheel Drive - 45% (24°)
Turning Radius (Outside)
2 Wheel Steer - 13 ft 2 in (4.0 meters)
4 Wheel Steer - 6 ft 6 in (2.0 meters)
Lift Speed - 500RTS
Up - 65 - 80 seconds
Down - 70 - 80 seconds
Platform Capacity - Fixed Platform
2,500 lb. (1135 kg)
Platform Capacity - Traversing Platform
Extension (If Equipped)
With Deck Extended
Main Deck - 2,000 lb (905 kg)
Extension - 500 lb (230 kg)
With Deck Retracted
2,000 lb (905 kg)
Machine Weight
Approx. 15,300 lb (6,940 kg)
Machine Height (Platform Lowered)
126.3125 in (3.15 m)
Machine Length
15 ft 5 in (4.72 meters)
Machine Width
Standard Tires - 7 ft 6 in (2.3 meters)
Foam Filled Tires - 7 ft 7 in (2.3 meters)
1.4 LUBRICATION
NOTE: Hydraulic oils must have anti-wear qualities at least
to API Service Classification GL-3, and sufficien-
themical stability for mobile hydraulic system ser-
vice. JLG Industries recommends Mobil 424
hydraulic oil, which has an SAE viscosity of 10W-20
and viscosity index of 152.
NOTE: Aside from JLG recommendations, it is not advisable
to mix oils of different brands or types, as they may
not contain the same required additives or be of
comparable viscosities. If use of hydraulic oil other
than Mobil 424 is desired, contact JLG Industries for
proper recommendations.
Table 1-1. Hydraulic Oil
HYDRAULIC SYSTEM OPERAT-
ING
TEMPERATURE RANGE
SAE VISCOSITY GRADE
0 to +23 degrees F
(-18 to -5 degrees C)
10W
0 to +210 degrees F
(-18 to +100 degrees C)
10W-20,10W-30
+50 to +210 degrees F
(+10 to +100 degrees C)
20W-20