beautypg.com

Important safeguards, Save these instructions, How to use – Black & Decker BLBD02LAUC User Manual

Page 2: Care and cleaning, Recipes

background image

Product may vary slightly from what is illustrated.

POLARIZED PLUG (120V Models Only)

This appliance has a polarized plug (one blade is wider than the other).

To reduce the risk of electric shock, this plug is intended to fit into a

polarized outlet only one way. if the plug does not fit fully into the outlet,

reverse the plug. if it still does not fit, contact a qualified electrician. do

not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to

prevent removal of the outer cover. To reduce the risk of fire or electric

shock, do not attempt to remove the outer cover. There are no user-

serviceable parts inside. Repair should be done only by authorized

service personnel.
ELECTRICAL CORD

a) a short power-supply cord (or detachable power-supply cord) is to be

provided to reduce the risk resulting from becoming entangled in or

tripping over a longer cord.

b) Longer detachable power-supply cords or extension cords are

available and may be used if care is exercised in their use.

c) if a long detachable power-supply cord or extension cord is used,

1) The marked electrical rating of the detachable power-supply cord

or extension cord should be at least as great as the electrical

rating of the appliance,

2) if the appliance is of the grounded type, the extension cord should

be a grounding-type 3-wire cord, and

3) The longer cord should be arranged so that it will not drape over

the countertop or tabletop where it can be pulled on by children or

tripped over.

Note: if the power supply cord is damaged, it should be replaced by

qualified personnel. in Latin america, by an authorized service center.

Please Read and Save this Use and Care Book.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should

always be followed, including the following:

read all instructions.

To protect against risk of electrical shock do not immerse cord,

plugs or appliance in water or other liquid.

close supervision is necessary when any appliance is used by or

near children.

unplug from outlet when not in use, before putting on or taking

off parts, and before cleaning.

avoid contacting moving parts.

do not operate any appliance with a damaged cord or plug or

after the appliance malfunctions, or is dropped or damaged in

any manner. return appliance to the nearest authorized service

facility or call the appropriate toll-free number on the front of

this manual for examination, repair or electrical or mechanical

adjustment. or, call the appropriate toll-free number on the cover

of this manual.

The use of attachments, including canning jars, not recommended

by the manufacturer may cause fire, electric shock or injury.

do not use outdoors.

do not let cord hang over edge of table or counter.

Keep hands and utensils out of container while blending to reduce

the risk of severe injury to persons or damage to the blender.

a scraper may be used, but must be used only when the blender

is not running.

Blades are sharp. Handle carefully.

To reduce the risk of injury, never place cutter-assembly blades

on base without jar properly attached.

always operate blender with cover in place.

When blending hot liquids, remove center piece of two-piece

cover.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

How to Use

This product is for household use only.
GETTING STARTED
• remove all labels, tags and stickers attached to the body or cord.
• remove and save literature.
• Before first use, wash all removable parts except the unit base as instructed in care

and cLeaninG section of this manual.

BLENDER JAR ASSEMBLy

1. Place the blade assembly in the collar and place the

gasket over the blade assembly.

2. Holding the jar right-side up, place the jar over the collar

and turn it counterclockwise until tight (A).

3. Place the assembled jar onto the unit base.
4. Jar is now secure. do not try to twist jar onto unit base.

USING yOUR BLENDER
1. Make sure the unit is off (0) and plug the cord into a standard electrical outlet.
2. Place the food to be blended into the jar and put the lid on the jar before

blending. Make sure the measuring cup is in place. When crushing ice or hard

foods, keep one hand on the lid.

3. Select the appropriate speed setting for your task: Press the off (0) button when

finished.

4. use the pulse button (P) for a few seconds, then release

for quick or delicate blending tasks (B).

5. if you want to add ingredients while the blender is on,

remove the measuring cup and place through the lid

opening.

6. When finished blending, press the off (0) button.
7. To remove the jar, lift it from the unit base. remove the lid

before pouring.

Blending Tips and Techniques
• cut food into small pieces, about 2 in. (5 cm) before adding to the blender. To chop,

grate or prepare fruit smoothies using fresh or frozen fruit, cut foods into 3/4 in.

(2 cm.) pieces.

• For best circulation of foods that are to be blended with some liquid, pour the

liquid into the jar first, then add solids.

• Some of the tasks that cannot be performed efficiently with a blender are: beating

egg whites, whipping cream, mashing potatoes, grinding meats, mixing dough,

and extracting juices from fruits and vegetables.

• The following items should never be placed in the unit as they may cause damage:

bones, large pieces of solid frozen foods, or tough foods such as turnips.

• To crush ice, add up to 6 ice cubes. Hold one hand firmly on the lid. if more ice is

needed, remove the measuring cup and add cubes one by one through the hole in

the lid.

Care and Cleaning

This product contains no user serviceable parts. refer service to qualified service

personnel.
CLEANING
1. Before cleaning, press the off (0) button on the control panel and unplug the

blender.

2. rinse parts immediately after blending for easier cleanup. Wipe the unit base

with a damp cloth and dry thoroughly. remove stubborn spots by rubbing with

a damp cloth and non-abrasive cleaner. do not immerse the unit base in liquid.

3. all removable parts can be washed by hand or in a dishwasher. The lid,

measuring cup, collar, gasket and blade assembly should be placed in the top

rack only. disassemble before placing in the dishwasher. The Jars are bottom

rack dishwasher-safe. do not place the jars or any other parts in boiling liquids.

4. if liquids spill into the unit base; first unplug the unit, then wipe with a damp

cloth and dry thoroughly. do not use rough scouring pads or cleansers on parts

or finish.

Recipes

REFRIED BEANS
2 cans (15-16 oz/425-454 g each) pinto beans or 4 cups (960 ml) freshly cooked pinto

beans with their liquid
1 small onion, chopped
2 garlic cloves, chopped
1/4 cup (60 ml) bacon drippings or vegetable oil
1. drain beans and reserve liquid. in a medium skillet, cook beans, onion and garlic

over medium-high heat until onions are very soft.

2. Place 1 cup of the bean mixture in blender jar; cover and mix (speed 2). While

blender is running, remove the measuring cup and add a small amount of the

reserved bean liquid through the opening as needed to smooth out the mixture.

continue to add beans, 1 cup at a time, and liquid as needed, until all beans are

used and mixture is smooth.

Makes approximately 3 cups (720 ml).

STRAWBERRy-BANANA SMOOTHIE
1/2 cup (120 ml) orange juice
1 cup (about 5 oz./140 g) fresh strawberries, washed and hulled
1 medium banana, cut into 3 pieces
1 container (8 oz./240 ml) vanilla low-fat yogurt
1 Tbsp. honey (15 ml)
3 ice cubes
in blender jar, add first 5 ingredients in order. cover and mix on (speed 2) for

10 seconds. While blender is running, remove the measuring cup. add ice cubes and

continue to blend until mixture is thick, smooth and creamy.
Makes 2 servings

is a registered trademark of The Black & decker corporation,

Towson, Maryland, uSa

Póliza de Garantía
(Válida sólo para México)
Duración
applica Manufacturing, S. de r. L. de c.V. garantiza este producto por 2 años a

partir de la fecha original de compra.
¿Qué cubre esta garantía?
esta Garantía cubre cualquier defecto que presenten las piezas, componentes y la

mano de obra contenidas en este producto.
Requisitos para hacer válida la garantía
Para reclamar su Garantía deberá presentar al centro de Servicio autorizado la

póliza sellada por el establecimiento en donde adquirió el producto. Si no la tiene,

podrá presentar el comprobante de compra original.
¿Donde hago válida la garantía?
Llame sin costo al teléfono 01 800 714 2503, para ubicar el centro de Servicio

autorizado más cercano a su domicilio en donde usted podrá encontrar partes,

componentes, consumibles y accesorios.
Procedimiento para hacer válida la garantía
acuda al centro de Servicio autorizado con el producto con la póliza de Garantía

sellada o el comprobante de compra original, ahí se reemplazará cualquier pieza

o componente defectuoso sin cargo alguno para el usuario final. esta Garantía

incluye los gastos de transportación que se deriven de su cumplimiento.
Excepciones
esta Garantía no será válida cuando el producto:
a) Se hubiese utilizado en condiciones distintas a las normales.
B) no hubiese sido operado de acuerdo con el instructivo de uso que le acompaña.
c) cuando el producto hubiese sido alterado o reparado por personas no

autorizadas por applica Manufacturing, S. de r. L. de c.V.

Nota: usted podra encontrar partes, componentes, consumibles y accesorios

en los centros de servicios autorizados. esta garantía incluyen los gastos de

transportación que se deriven de sus cumplimiento dentro de sus red de servicio.

Argentina

SerVicio Tecnico cenTraL

aTTendance

avda. Monroe n° 3351

Buenos aires – argentina

Fonos: 0810 – 999 - 8999

011 - 4545 - 4700

011 – 4545 – 5574

[email protected]
Chile

MaSTer SerVice SerVicenTer

nueva Los Leones n° 0252

Providencia

Santiago – chile

Fono Servicio: (562) – 232 77 22

[email protected]
Colombia

PLinareS

avenida Quito # 88a-09

Bogotá, colombia

Tel. sin costo 01 800

7001870
Costa Rica

aplicaciones electromecanicas, S.a.

calle 26 Bis y ave. 3

San Jose, costa rica

Tel.: (506) 257-5716 / 223-0136
Ecuador

Servicio Master de ecuador

av. 6 de diciembre 9276 y los alamos

Tel. (593) 2281-3882
El Salvador

calle San antonio abad 2936

San Salvador, el Salvador

Tel. (503) 2284-8374
Guatemala

MacPartes Sa

3ª calle 414 Zona 9

Frente a Tecun

Tel. (502) 2331-5020 / 2332-2101
Honduras

ServiTotal

contigua a Telecentro

Tegucigalpa, Honduras,

Tel. (504) 235-6271

México

articulo 123 # 95 Local 109 y 112

col. centro, cuauhtemoc,

México, d.F.

Tel. 01 800 714 2503
Nicaragua

ServiTotal

de semáforo de portezuelo

500 metros al sur.

Managua, nicaragua,

Tel. (505) 248-7001
Panamá

Servicios Técnicos caPri

Tumbamuerto Boulevard

el dorado Panamá

500 metros al sur.

Tel. 3020-480-800 sin costo

(507) 2360-236 / 159
Perú

Servicio central Fast Service

av. angamos este 2431

San Borja, Lima Perú

Tel. (511) 2251 388
Puerto Rico

Buckeye Service

Jesús P. Piñero #1013

Puerto nuevo, SJ Pr 00920

Tel.: (787) 782-6175
Republica Dominicana

Plaza Lama, S.a.

av, duarte #94

Santo domingo,

república dominicana

Tel.: (809) 687-9171
Venezuela

inversiones Bdr ca

av. casanova c.c.

city Market nivel Plaza Local 153

diagonal Hotel Melia,

caracas.

Tel. (582) 324-0969
www.applicaservice.com

[email protected]

Por favor llame al número correspondiente que aparece en la lista a continuación

para solicitar que se haga efectiva la garantía y donde ud. puede solicitar

servicio, reparaciones o partes en el país donde el producto fué comprado.

También puede consultarnos en el e-mail servicio@applicamail com.mx

es una marca registrada de The Black & decker corporation,

Towson, Maryland, e.u.

NEED HELP?
For service, repair or any questions regarding your appliance, call the appropriate

800 number on cover of this book. Please DO NOT return the product to the place of

purchase. also, please DO NOT mail product back to manufacturer, nor bring it to a

service center. You may also want to consult the website listed on the cover of this

manual.
Two-year Limited Warranty
(Applies only in the United States and Canada)
What does it cover?
• any defect in material or workmanship provided; however, applica’s liability will

not exceed the purchase price of product.

For how long?
• Two years from the date of original purchase with proof of such purchase.
What will we do to help you?
• Provide you with a reasonably similar replacement product that is either new or

factory refurbished.

How do you get service?
• Save your receipt as proof of date of sale.
• Visit the online service website at www.prodprotect.com/applica, or call toll-free

1-800-231-9786, for general warranty service.

• if you need parts or accessories, please call 1-800-738-0245.
What does your warranty not cover?
• damage from commercial use
• damage from misuse, abuse or neglect
• Products that have been modified in any way
• Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
• Shipping and handling costs associated with the replacement of the unit
• consequential or incidental damages (Please note, however, that some states do

not allow the exclusion or limitation of consequential or incidental damages, so

this limitation may not apply to you.)

How does state law relate to this warranty?
• This warranty gives you specific legal rights. You may also have other rights that

vary from state to state or province to province.

A

B

1. 2-oz. measuring cup
2. Lid
3. 48-oz. (1.4 L) Glass Jar
4. Gasket
5. Multi-level stainless steel blades
6. Collar
7. Die-cast metal base
8. Controls (see B)

This manual is related to the following products: