3 changing and saving custom data, Changing and saving custom data – Eppendorf TrackIT User Manual
Page 12
Operation
Eppendorf TrackIT
English (EN)
12
5.3
Changing and saving custom data
Prerequisites
• The device data has been read out.
Abb. 5-1: Custom data
Fig. 5-1:
Custom data
1. In the
Custom data
area, click on the lock symbol.
The lock symbol is open.
2. In the
Value
column, enter the data (in ASCII format).
3. Hold the reader at the position of the RFID chip.