Eppendorf TrackIT - Manual (Page 11)

Operation
Eppendorf TrackIT
English (EN)
11
5 Operation
5.1 Reading device data
Prerequisites
• The reader is active.
1. Hold the reader with the LED directly located at the position of the RFID chip.
• The reader's LED lights green.
• A window with the message Reading device data appears.
• Once the reading process is complete, the reader's LED lights blue.
• The device data is displayed in the main screen.
5.2 Checking the RFID chip
You can check whether the RFID chip is writable.
Prerequisites
• Device data has been read in.
1. On the Device data data sheet, click on the lock symbol.
• The lock symbol is opened: the RFID chip is writable.
• The lock symbol is grayed out: the RFID chip can only be read.