Eppendorf Excella E-5 Classic Platform Shaker - Manual (Page 9)

Product description
New Brunswick Excella® E-5 Open Air Shaker
English (EN)
9
3 Product description
3.1 Main illustration
Abb. 3-1: Excella E-5 front and rear view
Fig. 3-1: Excella E-5 front and rear view
3.2 Overview
The Excella E-5 is a portable benchtop shaker utilizing a UniCentric™ single eccentric counterbalanced
drive to provide horizontal plane rotary motion in a 1.91 cm (¾ in) circular orbit. A Proportional/Integral
(PI) Microprocessor controller with instantaneous digital feedback controls the speed over a range of
50
rpm – 400 rpm .
The shaker may be operated either continuously or in a timed mode via a programmable timer for shaking
periods of 0.1
– 99.9 h.
The E-5 is equipped with visual and audible alarms which are activated when an alarm condition exists, as
follows:
• The end of a timed run
• Deviations of shaking speed
• Power failure
A wide variety of platforms can be used with the E-5. Dedicated platforms are available for a variety of flask
sizes. Universal platforms, and test tube racks are also available.
1 Keypad
2 Spill cover
3 Electrical specification plate
4 ON/OFF switch
5 Fuse holder
6 Mains/Power connector
1
2
5 3 6 4