Eppendorf 2350 Biological Shakers Innova - Manual (Page 14)

Product description
New Brunswick
™ Innova ® 2300/2350 Shakers
English (EN)
14
3.4.2 Keypad
3.4.3 Status indicators
3.4.4 Function indicators
3.5 Platform assemblies
The Innova 2300 can be used with a wide variety of 46 cm x 76 cm (18 in x 30 in) platforms which will
accept a variety of clamps for flasks, test tubes, etc.
The Innova 2350 can accommodate a wide variety of 61 cm x 91.4 cm (24 in x 36 in) platforms which will
accept a variety of clamps for flasks, test tubes, etc.
START/STOP • Starts and stops the drive
• Activates or stops timer when timed run is
desired
Keys • Adjusts the setpoint of a displayed parameter up
or down
• Used to enter the SET mode for setpoint
changes
SELECT • Changes the displayed parameter
MAINT • Illuminates after 10,000 hours of use
• Accumulated running time is internally
monitored and may be displayed as a guideline
• Indicates need for routine maintenance (see
Routine maintenance on p. 25)
SET Illuminates to indicate that:
• Shaker is in SET mode
• Setpoints are being displayed
• Setpoints can be altered
TIME • Illuminates to indicate that the timer is in
operation
MUTE • Illuminates to indicate that the audible alarm is
disabled
RPM Revolutions per minute
HRS Time remaining
°C Temperature function (only activated of the
temperature/monitor option is installed)
* Not applicable