Eppendorf Mastercycler pro - Manual (Page 38)

Operation
Mastercycler pro
English (EN)
38
5.4.3.2 Removing storage media
5.4.4 Selecting export file formats
When exporting programs, protocols and log files to external storage media, you can choose between
text-only format (.TXT) and PDF.
 Confirm your selection with OK .
The file is copied to the external storage medium, and the file name is displayed.
CAUTION! Device damage due to cancellation of the update process.
 Ensure power supply during the update.
 Do not switch the cycler off during the update.
 Do not disconnect the control panel from the cycler during the update.
 Leave the external storage medium in the control panel until the latter has been restarted
after the update and you have logged on again.
Removing the USB storage medium
Caution! The symbol is displayed in the upper
right corner while the USB storage medium is being
accessed. Wait until it has disappeared before
removing the USB storage medium.
 Remove the USB storage medium.
Removing the MMC memory card
Caution! The symbol is displayed in the upper
right corner while the MMC is being accessed. Wait
until it has disappeared before removing the MMC.
1. Briefly press on the projecting end of the inserted
MMC.
2. Pull the MMC out of the slot.
The USB node disappears from the navigation tree. The MMC node disappears from the navigation tree.
Select memory device Select USB or MMC as the storage medium for the file you would like to
export, if more than one storage medium is connected to the system.
Select file format Selecting the file format:
• PDF : Saves the file as PDF.
Use this setting if you only want to print or view the documents on your
PC. You need to have a PDF reader software installed (e.g. Adobe
®
Reader ® ).
• Text-only (.TXT) : Saves the file in text-only format (.TXT). Use this
setting if you want to process the document content electronically (e.g.
embed it in a report).