Eppendorf 5810 R Centrifuge - Manual (Page 3)

You will find a detailed description of these figures in your language in Chapters 2.1 and 5.1.
Abb. 1: Depiction of Centrifuge 5810 and 5810 R. The Centrifuges 5804 and 5804 R are similar in design.
Depiction of Centrifuge 5810 and 5810 R. The Centrifuges 5804 and 5804 R are similar in design.
1 Centrifuge lid 2 Monitoring glass
3 Control panel with display 4 Emergency release
5 Condensation water tray (only Centrifuge 5804 R/
5810 R)
Task/function Press Display Details
Set parameter
1. Press or etc.
2. Press or .
1. Selected parameter
flashes.
2. New value appears.
Chapter 5.4.1
Soft start/stop
1. Press repeatedly.
2. Press or to
select ramp.
: Acceleration ramp 0
(long) ... 9 (short).
: Deceleration ramp 0
(long) ... 9 (short).
Chapter 6.2 (English,
German)
Alarm ON/OFF
 Press +
simultaneously.
Alarm on/Alarm off Chapter 6.7.2 (English,
German)
Programming
(during rotor stop only) 1. Set parameter.
2. Press 2 × .
3. Store: Press > 2 s.
1. Parameter.
2.
P... : first idle program no.
3. OK
Chapters 6.4 - 6.6 (English,
German)
At set rpm
(with open centrifuge lid
only)
Press > 4 s.
: on/ : off
Chapter 6.3 (English,
German)