Eppendorf Eporator - Manual (Page 27)

Maintenance
Eppendorf Eporator®
English (EN)
27
7 Maintenance
7.1 Cleaning

Wet a cloth with a mild cleaning fluid and demineralized water and remove the
contamination on the outside of the device.
7.2 Replacing fuses
The fuse holder is located between the mains/power cord socket and the mains/power
switch.
1. Unplug the mains/power plug.
2. Press the upper and lower end of the plastic springs 1 together and pull the fuse holder
2 fully out.
3. Replace faulty fuses and reinsert the fuse holder. Make sure that the guiding rail 3 is
positioned correctly.
DANGER! Electric shock as a result of penetration of liquid.

Switch off the device and disconnect it from the power supply before any
maintenance or cleaning work is carried out.

Do not allow any liquids to enter the inside of the housing.

Do you use any spray disinfectants on the housing.

Only reconnect the device to the power supply once it is completely dry.
NOTICE! Damage from using aggressive chemicals.

Do not use any aggressive chemicals on the device or its accessories, such as
strong and weak bases, strong acids, acetone, formaldehyde, halogenated
hydrocarbons or phenol.

If the device becomes contaminated with aggressive chemicals, clean it
immediately with a mild cleaning agent.
1
2
3