Eppendorf Eporator - Manual (Page 11)

Installation
Eppendorf Eporator®
English (EN)
11
4 Installation
4.1 Preparing installation

Check all parts for any transport damage.
4.2 Selecting the location
Please select the location for the Eporator according to the following criteria:
• Mains connection (230 V/120 V/100 V) according to the name plate. This is located on
the rear side of the device.
• At least 10 cm away from adjacent devices and walls.
• Solid bench with stable, horizontal and even work surface.
4.3 Installing the instrument
1. Connect the provided mains cable to the mains connection socket of the Eporator and
the power supply.
2. Switch on the Eporator at the mains power switch.
Retain the transport carton and packing material for subsequent safe transport
or storage.
WARNING! Danger from using an incorrect power supply.

Only connect the device to voltage supplies which correspond with the
electrical requirements on the name plate.

Only use sockets with a protective grounding conductor and a suitable mains
cable.