Barco CORONIS MFGD 3621 - Manual (Page 43)

After unpacking the display
43
• In a Coronis system, the image orientation will adapt to the new
panel orientation automatically after a second.
• If the I-switch software is installed and enabled, the image
resolution will also be adapted automatically to the new panel
orientation.
• If you use the display stand-alone, the image orientation will
not change with the panel orientation.
Only the orientation of the on-screen display (OSD) will change
automatically in case “Orientation” in the OSD Geometry menu is
set to “Automatic”.
To change the orientation of the image, you will have to change
the resolution in the Windows Display control panel (if possible).