Aries Automotive 15800 - Manual

PARTS LIST:
Qty Description Qty Description
1 Passenger side/right bracket 1 Driver side/left bracket
PROCEDURE:
1. Starting with the Passenger/Right side locate and begin to remove the factory (2) Torque bolts
located on the bottom of the windshield pillar, as seen in (Fig 1) with the torque bolts removed
select the passengers/right side light bracket attach it to the windshield pillar with the (2)
factory torque bolts repeat this for the drivers side.
2. Do periodic inspections to the installation to make sure all hardware is secure and tight.
To protect your investment, wax this product after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives
that could damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish.
Mild soap may be used also to clean the Sidebar.
For gloss black finishes: Mild soap may be used to clean the Sidebar.
4/9/2013
INSTALLATION INSTRUCTIONS
2007-13 WINDSHIELD LIGHT BRACKETS
PART #15800
Passenger/Right Side
Light Bracket Driver/Left Side
Light Bracket
Installation complete
Fig 1
Location of Torque bolts