Aries Automotive 364020-2 - Manual (Page 3)

To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Products.
For gloss black finishes: Mild soap may be used to clean the Products.
Driver Side Installation Pictured
12/15/2011 Page 3 of 4
10mm Nut Plate
10mm x 30mm Hex bolt
10mm Lock Washer
10mm Flat Washer
10mm x 30mm Hex bolt,
10mm Hex nut
10mm Flat Washers
10mm Lock Washer
Fig 1 Fig 2
Fig 3
Fig 4
Fig 4A
Driver Side Front
Bracket Pictured
Front of Vehicle
Front of Vehicle
Factory Bolt
Fig 5
Place 10mm T
Bolt in hole.
10mm T Bolt
10mm Flat Washers
10mm Lock Washer
10mm Nut
10mm x 30mm Hex bolt,
10mm Hex nut
10mm Flat Washers
10mm Lock Washer
Location for
10mm Bolt Plate.