Aries Automotive 363017-2 - Manual (Page 3)

To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Sidebar.
For gloss black finishes: Mild soap may be used to clean the Sidebar.
Driver Side Installation Pictured
Page 3 of 4 10/24/2011
Clip Nuts
(2)10mm x 35mm Hex bolt
(2)10mm Lock Washer
(2)10mm Flat Washer
(2)10mm x 35mm Hex bolts
(2)10mm Hex nut
(4)10mm Flat Washers
(2)10mm Lock Washer
Fig 1 Fig 2
Fig 3 Fig 4
Fig 5 Fig 6
Driver Side Front
mounting location
under tape
Front of Vehicle
Front of Vehicle
Factory hole in frame
rail driver side rear
10mm clip Nuts
Front of Vehicle
(2)10mm x 35mm Hex bolt
(2)10mm Lock Washer
(2)10mm Flat Washer
(2)10mm x 35mm Hex bolts
(2)10mm Hex nut
(4)10mm Flat Washers
(2)10mm Lock Washer
Front driver
Bracket shown
Middle driver
Bracket shown