Aries Automotive S229008 - Manual

INSTALLATION INSTRUCTION
4 INCH STRAIGHT OVAL SIDE BAR Part# 229008
NISSAN X-TERRA 05-11
Page 1 of 1
Note and Products Care:
λ Pictures are only for reference. Actual products may be slightly different but installation is the same.
λ Read Carefully the instruction sheet before installing. Take good care of your vehicle when installing to prevent any
scratch.
λ Check periodically to see if there’s any loose bolts and nuts to ensure safe driving. Protect the finish with a
non-abrasive automotive wax on a regular basis.
Part list:
NO. NAME QTY REMARKS NO. NAME QTY REMARKS
○ 1 Side bar 2 ○ 5 Big washers 24 8mm
○ 2 L- Mount bracket 3 ○ 6 Lock washer 12 8mm
○ 3 R- Mount bracket 3 ○ 7 Lock nut 12 M8
○ 4 Hex bolt 12 M8×25
Assembly procedure:
Step 1： Check all the contents are available in accordance with the above list (Parts list).
Step 2： Install the mounting bracket using○
5 ○ 7
and factory threaded studs.
Step 3： Install the side bar to mounting bracket using○
4 ○ 5 ○ 6 .
Step 4： After checking for proper clearance and alignment of the side bar on the vehicle, fully tighten all
hardware.
Step 5：
Installation done.
○ 1
○ 2
FRONT
Mounting panel
○ 5 ○ 7
○ 4 ○ 5 ○ 6
Factory 8mm
threaded studs
Install picture