Bryant 602A - Manual (Page 2)

—2—
Downflow operation is easily provided in the field to allow vertical
ductwork connections. The unit base utilizes knockout style seals
on the bottom openings to ensure a positive seal in the horizontal
airflow mode.
Standard metal duct covers with insulation come with the unit
and cover the duct openings. These can be left in place if the units
are converted to downshot.
Cabinets are constructed of heavy-duty, phosphated, zinc-coated
prepainted steel capable of withstanding 500 hours of salt spray.
Interior surfaces are insulated with cleanable semi-rigid insulation
board, which keeps the conditioned air from being affected by the
outdoor ambient temperature and provides improved indoor air
quality. (Conforms to American Society of Heating, Refrigeration
and Air Conditioning Engineers No. 62P.) The sloped drain
minimizes standing water in the drain, which is provided with an
external drain fitting.
Short-Cycling protection (Time Guard® II Logic) for the
compressor is incorporated into our defrost control board ensuring
a five minute delay (+/-2 minutes) before restarting compressor
after shutdown for any reason.
TABLE OF CONTENTS
Page
Features/Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,2
Model Number Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . 3
ARI Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Physical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,6
Base Unit Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7,8
Accessory Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Selection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-18
Typical Piping and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 22
Typical Wiring Schematics . . . . . . . . . . . . . . . . . . . . . . . . . 23-25
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Guide Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27,28