Aries Automotive 201002-2 User Manual
Aries Automotive For the car

(888)
800-ARIES
824 E. Anaheim St., Ste A
Wilmington, CA 90744
Part No. 201002, 201002-2
Application: 2002-05 JEEP LIBERTY SPORT, LIMITED
PARTS LIST
ITEM
DESCRIPTION
QUANTITY
1.
STEP
BAR
ASSEMBLY,
PASSENGER
SIDE
1
2.
STEP
BAR
ASSEMBLY,
DRIVER
SIDE
1
3.
FRONT
MOUNT
BRACKET,
PASSENGER
1
4.
FRONT
MOUNT
BRACKET,
DRIVER
1
5.
REAR
MOUNT
BRACKET,
PASSENGER
1
6.
REAR
MOUNT
BRACKET,
DRIVER
1
7.
BOLT PLATE
6
8.
PLASTIC
WASHER
6
9.
3/8-16
X
1.00”
BUTTON
HEAD
CAP
SCREW
8
10.
3/8”
INTERNAL
TOOTH
LOCK
WASHER
8
11.
½”
FLAT
WASHER
8
12.
½”
SPLIT
LOCK
WASHER
8
13.
½”-13 HEX NUT
6
14.
5/8”
FLAT
WASHER
2
15.
M12-1.75
HEX
NUT
2
TOOLS REQUIRED
ITEM
DESCRIPTION
QUANTITY
1.
¾” SOCKET
1
2.
19MM COMBINATION WRENCH
1
3.
7/32”
HEX
WRENCH
(ALLEN) 1
4.
RATCHET
1
5.
TORQUE WRENCH
1
INSTALLATION INSTRUCTIONS
STEP 1
Remove the contents from the box and check for any damage. Verify all parts against the parts list.
STEP 2
Read and understand instructions completely before beginning installation.
STEP 3
Determine driver front and rear mount brackets. Locate mount holes on frame for front and rear brackets. For rear mount
location, install (1) bolt plate through large hole on bottom of frame into small hole on side of frame and use (1) plastic
washer to hold in place. For front mount location, insert (2) bolt plates through large hole so that they protrude through
smaller holes adjacent and use (2) plastic washer to hold in place. See figure 1.
STEP 4
Position driver rear bracket in place with (1) 5/8” flat washer above bracket as a spacer. Fasten 12mm stud and ½” bolt
plate using (1) ½ -13 hex nut. (1) M12 -1.75 hex nut, (2) ½” flat washer and (2) ½” lock washer. Leave fasteners loose.