Aries Automotive 207003-2 - Manual (Page 2)

Part # 207003 / 207003-2
2007-10 Hyundai Santa Fe
Installation Instructions
Page2 of 2
Step Four: Place the rear bolt plate through the body as shown in pic 3. Attach rear
support bracket as shown in pic 4 .
Step Five: Loosely attach the side bars to the brackets(pic 5).
Step Six: After checking to make sure the side bars are level and parallel with the sides
of the vehicle completely tighten all hardware.
Step Seven: Repeat steps three, four , five ,six and seven on opposite side.
Step Eight: Periodically check and retighten the hardware as necessary.
PIC 1 PIC 2
Plastic covers Plastic covers
PIC 3 PIC 4
PIC 5
Front Rear
○ 14 ○ 15 ○ 16 ○ 17
○ 7 ○ 8 ○ 9
○ 8 ○ 9 ○ 10 ○ 11 ○ 18
○
12
○
13
○
14
○
15
Through
Rear bracket(right)
Front bracket(right)
○ 13 ○ 14 ○ 15 ○ 19