Aries Automotive 203016-2 User Manual
Installation instructions
PART # 203016 / 203016-2
2004-10 F150 SUP, CAB
PARTS LIST
(1) ARIES SIDEBAR (DRIVER SIDE)
(1) ARIES SIDEBAR (PASSENGER SIDE)
(2) FRONT MOUNT BRACKETS
(2) BACK MOUNT BRACKETS
(8) 10MM CLIP NUTS
(8) 10MM X 25MM HEX HEAD BOLTS
(8) 10MM SAE FLAT WASHERS
(24) 10MM FLAT WASHERS
(16) 10MM X 30MM HEX HEAD BOLTS
PROCEDURE
1. BEGIN INSTALLATION BY WORKING ON PASSENGER SIDE OF VEHICLE
2. REMOVE FACTORY LONG GATE RUBBER PLUG/TAPE WHICH COVERS MOUNTING HOLES ON
INNER ROCKER PANEL LOCATED IN FRONT AND REAR (SEE DIAGRAM 1.). ONCE REMOVED SLIDE
10MM CLIP NUTS OVER HOLES (THERE ARE TWO HOLES FOR EACH BRACKET).
3. INSTALL MOUNTING BRACKETS TO INNER ROCKER PANEL USING 10MM BOLTS AS SHOWN IN
DIAGRAM 2. HAND TIGHTEN ONLY.
4. ATTACH SIDEBAR TO BRACKETS USING THE 10MM HEX HEAD BOLTS AND WASHERS. ALIGN THE
SIDE BAR WITH THE VEHICLE BODY THEN TIGHTEN ALL FASTENERS AT 30FT/LBS). REPEAT
STEPS FOR PASSENGER SIDE TO COMPLETE INSTALLATION.
DIAGRAM 1
DIAMGRAM 2
INSTALLATION INSTRUCTIONS