Aries Automotive 205031-2 User Manual
Installation instructions, Parts list
Page 1 of 7 4/1/11 REV1 (DP)
Parts List:
1 Driver/Left sidebar
4
12mm x 24mm OD x 2.5mm Small Flat Washer
1 Passenger/Right sidebar
6
12mm Lock Washers
1 Driver/Left Front Mounting Bracket
6
12mm Hex Nuts
1 Passenger/Right Front Mounting Bracket
1
10-1.5mm x 40mm Hex Bolts (4WD Vehicles Only)
1 Driver/Left Front Inner Support Bracket (4WD Vehicles
With Skid Plate Only)
2
10-1.5mm x 35mm Hex Bolts
1 Driver/Left Front Inner Support Bracket (2WD & 4WD
Vehicles W/O Skid Plate Only)
4
10-1.5mm x 30mm Hex Bolts
1 Passenger/Right Inner Support Bracket (All)
16 10mm x 30mm x 2.5mm Flat Washers
2 Driver/Left Outer Support Brackets (fit left front and left
rear only)
6
10mm Lock Washers
2 Passenger/Right Outer Support Brackets (fit right front
and right rear only)
6
10mm Hex Nuts
1 Driver/Left Rear Mounting Bracket
5
10mm Nylon Lock Nuts
1 Passenger/Right Rear Mounting Bracket
8
8-1.25mm x 25mm Hex Bolts
2 Rear Inner "L" Support Brackets
8
8mm x 24mm OD x 2mm Flat Washers
4 12-1.75mm x 40mm Bolt Plates (use for front and rear
Outer Support Brackets only)
8
8mm Lock Washers
4 10-1.5mm x 35mm Long Bolt Plates (use for Rear
Brackets only)
2
6-1.0mm x 30mm Hex Bolts
2 10-1.5mm x 35mm Short Bolt Plates (use for Front Inner
Support Brackets only)
6
6-1.0mm x 25mm Hex Bolts
2 12-1.75mm x 35mm Hex Bolts
16 6mm x 18mm OD x 1.6mm Flat Washers
4 12mm x 32mm OD x 3mm Large Flat Washer
8
6mm Nylon Lock Nuts
INSTALLATION INSTRUCTIONS
3" ROUND & 4" OVAL SIDEBARS
2011 DODGE DURANGO
PART#205031/205031-2