Aries Automotive 205001-2 User Manual
Aries Automotive For the car

ITEM
1
2
3
4
5
6
7
8
9
10
11
12
QTY
1
2
2
2
2
2
2
2
2
4
4
4
CONTENTS
Sidebar Set (Driver & Passenger)
Mounting Front Brackets (Driver &
Passenger Side)
Mounting Rear Brackets (Driver &
Passenger Side)
Mounting Auxiliary Brackets
Mount Tabs
3/8 x 1” Hex. Head bolt
3/8” Flat washers
3/8” Lock washers
3/8” Hex. nuts
½ x 1 ½” Hex. head bolts
½” Flat washers
½” Lock washers
TOOLS
¾” Socket
9/16” Socket
19mm Socket
Ratchet
Torque wrench
STEP 1:
STEP 2:
STEP 3:
STEP 4:
STEP 5:
Read and understand instructions completely before beginning installation.
Sidebar set consists of a driver and passenger sidebar. Be sure to
determine the correct side before installation.
Bolt mounting brackets to the Sidebars as shown in Figure 1. Leave loose.
Remove the body mounting bolts from mounts located under the cab of
truck. Position sidebar assembly up to the body mounts and install with the
factory bolts, as shown in Figure 1.
Remove factory rubber plug on underside of body that lines up with
threaded hole in bottom of sidebar. Figure 2.
INSTALLATION INSTRUCTIONS
1997-04 DAKOTA STD / REG CAB
PART # 205001 / 205001-2