Aries Automotive B35-2003 - Manual

2007-10 TOYOTA FJ CRUISER
BULL BAR PART# B35-2003 / 35-2003
INSTALLATION INSTRUCTIONS
PARTS LIST:
1 BULL BAR
2 BRACKETS DRIVER/ PASSENGER
4 7/16 X 1 1/4 HEX HEAD BOLTS
4 7/16 HEX NUTS
8 7/16 FLAT WASHERS
4 3/8 X 4 1/2 HEX HEAD BOLT
4 3/8 NYLOC HEX NUT
8 3/4 FLAT WASHERS
PROCEDURE:
1- REMOVE CONTENTS FROM BOX AND CHECK FOR DAMAGE. VERIFY ALL
PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY.
2- LOCATE FRAME MOUNT FOR LOWER BRACKET (DRIVER SIDE SHOWN).
INSERT (2) 3/8 X 4 1/2 HEX HEAD BOLTS, (2) 3/8 FLAT WASHERS. INSTALL
LOWER BRACKET USING (2) 3/8 HEX NYLOC NUTS, (2) 3/8 HEX NYLOC NUTS
(2) 3/8 FLAT WASHERS, LEAVE LOOSE. SEE FIG. #1
3- REPEAT PROCEDURE #2 ON OPPOSITE SIDE
4- INSTALL BULL BAR ONTO VEHICLE USING (4) 7/16 X 1 1/4 HEX HEAD BOLTS,
(4) 7/16 HEX NYLOC NUTS, (8) 7/16 FLAT WASHERS. LEAVE LOOSE SEE FIG #2.
5- LEVEL AND ADJUST BULL BAR AS DESIRED THEN TIGHTEN.
3/8 x 4 1/2 HARDWARE
FIG. # 1
FIG. # 2
7/16 HARDWARE
DRIVER SIDE
SHOWN
PASSENGER
SIDE SHOWN