Aries Automotive B35-5004 - Manual

BULL BAR PART# B35-5004 / 35-5004
INSTALLATION INSTRUCTION
PARTS LIST:
1 – BULL BAR
2 – BRACKETS DRIVER/PASSENGER SIDE
6 – 7/16 X 1 1/4 HEX HEAD BOLTS
6 – 7/16 HEX HEAD NUTS
12 – 7/16 FLAT WASHERS
6 – 7/16 LOCK WASHERS
PROCEDURE:
1 – REMOVE CONTENT’S FROM BOX AND CHECK FOR DAMAGE. VERIFY
ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY.
2 – REMOVE LOWER URETHANE VALANCE LOCATED UNDERNEATH FRONT
BUMPER TEMPORARILY AND SET ASIDE
3 – UNBOLT (2) EXISTING NUTS LOCATED ON OUTER SIDE OF FRAME RAIL
(PASSENGER SIDE SHOWN) INSTALL LOWER BRACKET ONTO FRAME RAIL
BOLTS *LEAVE LOOSE* (SEE FIG # 1)
4 – REPEAT PROCEDURE #3 ON OPPOSITE SIDE
5- INSTALL BULL BAR USING 6 – 7/16 X 1 1/4 HEX HEAD BOLTS, 6 – 7/16 HEX
HEAD NUTS,
12 – 7/16 FLAT WASHERS *LEAVE LOOSE* (SEE FIG # 1)
6 – LEVEL AND ADJUST BULL BAR AS DESIRED. TIGHTEN & TORQUE BOLTS
2006-08 DODGE 1500 P/U