Aries Automotive P5058 User Manual
Page 5
Driver Side Installation Pictured
IMPORTANT: For models without tow hooks,
only use the supplied
12-1.5mm x 30mm Fine Thread Hex Bolt
12mm Lock Washer
12mm Flat Washer
(Fig 5) Driver side pictured from behind
bumper (non tow hook models)
Front
(Fig 8) Driver side mounting location pictured from
behind bumper on tow hook equipped model
Front
Fig 7
Front
Remove the (2) factory hex nuts
from the lower bumper bolts
Factory hex nuts
(2) 12mm Flat Washers
(2) 12mm Lock Washers
(2) 12mm Hex Nuts
Remove the (2) factory
hex nuts from tow hook
(Fig 6) Driver side Brackets Pictured
(non tow hook models)
(Fig 9) Driver side Brackets
pictured (models with tow hooks)
Front
Front
Front
(Fig 10) Attach the driver side Frame
Mounting Bracket to the bottom of the tow
Installation pictured without the
splash guard for illustration
Reuse (2) factory
hex nuts
Driver/Left
Support Bracket
Driver/Left
Mounting Bracket
Driver/Left Frame Bracket
(no tow hook models)
Page 5 of 7
10/30/2013