Aries Automotive 2059-2 - Manual (Page 2)

4. Install middle bracket onto radiator support (Driver and Passenger) using (4) M6
x 1.0 x 25mm Hex head bolt, (4) M6 Flat washer and tighten. ( Driver Side shown,
see Fig #5)
5. Insert top bracket in between bumper and grill (See Fig #6) Align and install top
bracket onto middle bracket using (2) 5/16 Hex head bolt, (2) 5/16 Flat washer.
Leave Loose ( Driver side shown, see Fig #7)
6. Repeat procedure #7 on opposite side.
7. Install (1) Grill Guard onto vehicle starting with lower brackets, using (4) 7/16 x 1
¼ Hex head bolts, (4) 7/16 Hex Nyloc Nut, (8) 7/16 Flat washer, then using (2)
3/8 x 1 button head bolts, (2) 3/8 Hex Nyloc nut, (2) 3/8 flat washer onto top
brackets. Leave Loose ( See Fig #8)
8. Level and adjust grill guard and desired then tighten.
Fig# 1 Fig# 2
Fig #3
Frame
Mount
3/8 x 4 ½ Hex
Lower
Bracket