Aries Automotive 6056-2 - Manual (Page 3)

To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Grille Guard.
For gloss black finishes: Mild soap may be used to clean the Grille Guard.
DRIVER SIDE INSTALLATION PICTURED
DRIVER SIDE INSTALLATION PICTURED
Page 3 of 4 12/12/11
Loosen but do not remove this
factory bolt from the frame mount
Fig 1
Insert Mounting Bracket between
frame support and cross member
Attach to Grill Guard with
(3) 12mm x 35mm Hex Bolts
(6) 12mm Flat Washers
(3) 12mm Lock Nuts
Fig 5 Fig 6
Remove factory
radiator top mount
Front
Remove these factory bolts from
the cross member
Fig 2
Fig 3 Lower plastic trim removed for reference Fig 4
Remove the plastic push pins & cover
(2) 12-125mm x 40mm Hex Bolts
(2) 12mm Flat Washers
(2) 12mm Lock Nuts