Snorkel MB26J - Manual (Page 27)

2. Operation & Specifications
2 - 17
DAILY PREVENTATIVE MAINTENANCE CHECKLIST
Daily preventative maintenance will prevent abnormal wear and prolong the life of all
systems. The inspection & maintenance schedule should be performed at the specified
intervals.
Inspection and maintenance shall be performed by personnel who are trained and familiar
with mechanical and electrical procedures.
! !
Before performing preventative maintenance, familiarize yourself with
the operation of the machine.
Always block the elevating assembly whenever it is necessary to perform
maintenance while the platform is elevated.
W A R N I N G
This Daily checklist has been designed for machine service and maintenance. Please
photocopy this page and use the checklist when inspecting the machine.
MAINTENANCE TABLE KEY
Y = Yes/Acceptable
N = No/Not Acceptable
R = Repaired/Acceptable
PREVENTATIVE MAINTENANCE REPORT
Date: _______________________________
Owner: _____________________________
Model No: __________________________
Serial No: ___________________________
Serviced By: _________________________
COMPONENT INSPECTION OR SERVICE Y N R
BATTERY
Check electrolyte level.
Check battery cable condition.
CHASSIS
Check hoses for pinch or rubbing points.
Check welds for cracks.
CONTROL CABLE
Check the exterior of the cable for pinching, binding or
wear.
CONTROLLER Check switch operation.
DRIVE MOTORS Check for operation and leaks.
ELEVATING ASSEMBLY Inspect for structural cracks.
EMERGENCY LOWERING
SYSTEM
Operate the emergency lowering valve & check for
serviceability.
ENTIRE UNIT Check for and repair collision damage.
HYDRAULIC FLUID Check fluid level.
HYDRAULIC PUMP Check for hose fitting leaks.
HYDRAULIC SYSTEM Check for leaks.
LABELS Check for peeling, missing, or unreadable labels & replace.
PLATFORM DECK AND
RAILS
Check welds for cracks.
TYRES AND WHEELS Check for damage.
Table 1: Daily Maintenance Checklist