Snorkel ULII40-sn21691+ - Manual (Page 16)

Page 14 Operation Manual
068017-022 ULII Inspection and Maintenance Schedule
I
NSPECTION AND
M
AINTENANCE
S
CHEDULE
The Complete Inspection consists of periodic visual and operational checks, along with periodic minor
adjustments that assure proper performance. Daily inspection will prevent abnormal wear and prolong the
life of all systems. The inspection and maintenance schedule should be performed at the specified inter-
vals. Inspection and maintenance shall be performed by personnel who are trained and familiar with
mechanical and electrical procedures.
W A R N I N G
Before performing preventative maintenance, familiarize yourself with the operation of the machine.
Always block the elevating assembly whenever it is necessary to perform maintenance while the
platform is elevated.
The daily preventative maintenance checklist has been designed for machine service and maintenance.
Please photocopy the Daily Preventative Maintenance Checklist and use the checklist when inspecting
the machine.
D
AILY
P
REVENTATIVE
M
AINTENANCE
C
HECKLIST
M AINTENANCE T ABLE K EY
Y = Yes/Acceptable
N = No/Not Acceptable
R = Repaired/Acceptable
P REVENTATIVE M AINTENANCE R EPORT
Date: _______________________________________
Owner:______________________________________
Model No: ___________________________________
Serial No:____________________________________
Serviced By: _________________________________
COMPONENT INSPECTION OR SERVICES Y N R
Battery
Check electrolyte level.
Check battery cable condition.
Chassis
Check bubble level accuracy
Check operation of outrigger interlocks
Check casters for damage
Check hoses for pinch or rubbing points.
Check welds for cracks.
Control Cable
Check the exterior of the cable for pinching, binding
or wear.
Controller Check switch operation.
Mast Assembly Inspect for bends, cracks or loose rivets.
Emergency
Lowering System
Operate the emergency lowering valve and check for
serviceability.
Hydraulic Fluid Check fluid level.
Hydraulic Pump Check for hose fitting leaks.
Hydraulic System Check for leaks.
Labels
Check for peeling, missing, or unreadable labels &
replace.
Cage and Deck
Check welds for cracks.
Check condition of deck.
COMPONENT INSPECTION OR SERVICES Y N R