Snorkel S2632E-sn000000 - Manual (Page 21)

Table of Contents
19 S1930E/S1932E/S2632E – 1360417
Daily Preventative Maintenance Checklist
Daily Preventative Maintenance Checklist
Preventative Maintenance Report
Date: _____________________________________
Owner: ____________________________________
Model No: _________________________________
Serial No: __________________________________
Serviced By: _______________________________
Item Inspect For Y N R
Operator’s Manual In manual holder, all pages readable and intact
Electrical System
Battery fluid level Proper level
Battery terminals Clean, connectors tight
Battery charger Proper operation
Cables and wiring harness No wear or physical damage
Hydraulic System
Fluid level Between full and add marks with platform stowed
Hoses, tubes and fittings No leaks, all fittings tight
Free-wheeling valve Fully closed
Tires and Wheels Good condition
Ground Strap In place and securely fastened
Lower Control Station
Operating controls
Proper operation
Emergency stop Shuts off lower controls/proper operation
Lowering alarm and interrupt Sounds when platform lowers/proper operation
Pothole Protection Interlock Proper operation
Emergency Lowering Proper operation
Safety Prop No damage or deformation
Flashing Light Proper operation
Structures
Weldments – Chassis, platform, etc. Welds intact, no damage or deformation
Slide blocks In place, no damage or deformation
Fasteners In place, tight, and no damage
Upper Control Station
Guardrail system Welds intact, no damage or deformation
All fasteners in place, no loose or missing parts
Platform extension Proper operation, no damage or deformation
Fold-down rails Fasteners in place, proper operation
Brakes Proper operation
Operating controls Proper operation
Emergency stop Shuts off upper controls
Lowering alarm and interrupt Sounds when platform lowers/proper operation
Drive motion alarm Sounds when aerial platform drive function is operated
Battery condition indicator Proper operation
Horn Sounds when activated
Placards and Decals In place and readable
Maintenance Table Key: Y = Yes/Acceptable, N = No/Not Acceptable, R = Repaired/Acceptable