Safety rules – Snorkel PUSH 6 ECO User Manual
Page 9

Page 8 of 23
Pop-Up PUSH 6 ECO
Operator’s Safety and Maintenance Handbook (v.0.4.0409)
Section 3
SAFETY RULES
Safety Rules
NEVER
Exceed the rated capacity (Safe Working Load or SWL) of the platform
(240kgs).
NEVER
Use the
POP-UP PUSH 6 ECO PUSH 6 ECO
as a ‘crane’ (e.g. by
suspending loads from beneath the platform).
NEVER
Make any attempt to increase the working height or outreach of the
platform (e.g. by use of stepladders in the platform).
NEVER
Operate the
POP-UP PUSH 6 ECO PUSH 6 ECO
if the bubble spirit
level is outside the marked limits.
NEVER
Manoeuvre the
POP-UP PUSH 6 ECO PUSH 6 ECO
on an inclined
surface otherwise it may become uncontrollable.
NEVER
Manoeuvre the
POP-UP PUSH 6 ECO PUSH 6 ECO
whilst in its
elevated position, as this may cause instability.
NEVER
Manoeuvre the
POP-UP PUSH 6 ECO
with a person or materials in
the platform.
NEVER
Enter or exit the platform unless the platform is in the lowered and
transport position.
NEVER
Apply external side loads to the platform or scissor structure.
NEVER
Allow persons at ground level to operate the controls whilst the
platform is occupied (unless in an emergency situation).
NEVER
Operate the
POP-UP PUSH 6 ECO
outdoors, it has not been
designed to withstand wind loading.
ALWAYS
Undertake the daily checks recommended in this handbook p.9 prior
to operation of the machine.
ALWAYS
Ensure that all instructions, Safe Working Load and warning decals
are clean and legible.
ALWAYS
Ensure the
POP-UP PUSH 6 ECO
is positioned on adequate ground
to support the weight of the machine.
ALWAYS
Ensure that sufficient clearance is given if working near to live
conductors.
ALWAYS
Ensure that the castor brakes have been locked before elevating the
work platform.
ALWAYS
Ensure that the platform does not come into contact with fixed objects
(e.g. buildings, etc.) or moving objects (e.g. vehicles, other plant
equipment, etc.).
ALWAYS
Replace any removable guard rails (e.g. close and lock access gate)
to enable full edge protection to be maintained.
ALWAYS
Ensure that the load is evenly distributed within the platform.
ALWAYS
Ensure the safety of persons that may enter the area around the
platform (e.g. cordon off areas to prevent persons entering the danger
area).
ALWAYS
Ensure hands are kept within the confines of the handrail when
operating the machine.
ALWAYS
Ensure that the area below the platform is clear of obstruction before
lowering.