Snorkel PUSH 6 ECO - Manual (Page 10)

Page 9 of 23 Pop-Up PUSH 6 ECO Operator’s Safety and Maintenance Handbook (v.0.4.0409)
Section 4
OPERATING INSTRUCTIONS
Daily checks
Prior to operating the POP-UP PUSH 6 ECO , the following items must be checked:
• Structure (e.g. damage, cracks,
corrosion, abrasion, welds, con-
nections)
• Platform (floor, rails, handrail
sockets)
• Castors (smooth movement, dam-
age)
• Brakes
• Oil leaks
• Battery condition
• Raise and lower functions
• Emergency stop and lowering
functions
• Safety decals and
training card
If the above checks reveal malfunctions or damage on the POP-UP PUSH 6
ECO , then the machine must not be used until the problem is rectified.
If in doubt, seek further assistance from the manufacturer.
If safety decals are no longer legible or missing, please contact the
manufacturer for replacements.
The Daily Checks page in Section 7 of this handbook may be photocopied to
provide an aide memoir for operators when undertaking these important checks.
WARNING
BEFORE OPERATING YOUR POP-UP PUSH 6 ECO , YOU MUST ENSURE
THAT YOU HAVE BEEN ADEQUATELY TRAINED IN ITS USE AND HAVE
FULLY READ AND UNDERSTOOD THIS OPERATOR’S HANDBOOK,
PAYING PARTICULAR ATTENTION TO SECTION 3 - SAFETY RULES
Manoeuvring the platform
Manoeuvre the platform into position using both hands on the guard rails at
gate end. Take care to avoid trapping hands or feet whilst manoeuvring the
platform.
Never manoeuvre the POP-UP PUSH 6 ECO whilst it is elevated or with a
person, tools or materials in the platform.