beautypg.com

Entering and leaving the work platform, Control pendant – Snorkel Pop-Up Push 8 Eco User Manual

Page 13

background image

Page 12 of 25

POP-UP PUSH 8 ECO

Operator’s Safety and Maintenance Handbook ( rev.0.0.1.0210)

Section 4

OPERATING INSTRUCTIONS

position ‘2’ is for charging the machine.

Entering and leaving the work

platform

Always use three points of contact when entering or exiting the platform, using the

handholds provided. For example, use two hands and one foot, as shown below.

Use the step provided on the base of the machine.

On entering the platform, ensure that the gate is closed behind you.

Control pendant

The control pendant houses the platform raise and lower controls.

Pressing the enable button and selecting ‘UP’ raises the platform.
Pressing the enable button and selecting ‘DOWN’ lowers the platform.
To avoid crushing and shearing hazards, a delay feature is fitted which

actuates when the platform is lowered to the transport position. The platform

will momentarily stop to enable the operator to look around the machine to

determine whether any persons are adjacent to the scissor mechanism. After

a time delay, the lowering control will be enabled once more to permit the

operator to continue to lower to the transport position.