Snorkel Pop-Up Push 6 Eco - Manual (Page 20)

Page 19 of 23 Pop-Up PUSH 6 ECO Operator’s Safety and Maintenance Handbook (v.0.4.0409)
Section 6
TRANSPORT INSTRUCTIONS
Loading and unloading
When loading or unloading the POP-UP PUSH 6 ECO , use one of the methods
shown.
When using a forklift to lift the POP-UP PUSH 6 ECO , ensure the forks are
sufficiently inserted into the forklift pockets in the base of the machine. Please see
the location of the forklift pockets below.
When using a tail lift to load or unload the POP-UP PUSH 6 ECO ensure that
brakes are applied to both castors. Ensure that the capacity of the tail lift is
sufficient to handle the POP-UP PUSH 6 ECO . Take care when manoeuvring the
machine on the tail lift.
When winching the machine onto or off a vehicle, ensure that the winch is
connected to the winch point as shown below. Ensure personnel are available to
guide the machine whilst the winch is in operation.
WARNING
NEVER ATTEMPT TO LOAD OR UNLOAD THE POP-UP PUSH 6 ECO BY
MANUAL EFFORT ONLY, SERIOUS INJURY, MACHINE OR PROPERTY
DAMAGE COULD RESULT
Forklift Tail lift
Fork lift pocket Winch point