Snorkel Pop-Up Push 6 Eco - Manual (Page 11)

Page 10 of 23 Pop-Up PUSH 6 ECO Operator’s Safety and Maintenance Handbook (v.0.4.0409)
Section 4
OPERATING INSTRUCTIONS
Engaging the brakes
Always ensure that both castor brakes are locked before elevating the work plat-
form to prevent any inadvertent movement.
The brakes are engaged by pushing down on the lever and pulling up the lever as
shown.
Powering up
The POP-UP PUSH 6 ECO is provided with a key operated switch which is used
to isolate the battery and therefore the electrical system, preventing unauthorised
use. To enable the electrical system, first turn the Maintenance Isolater switch to
position ‘1’ (ON) and insert the key into the emergency stop button. Turn clockwise
to release the button. Ensure that when the machine is not in use, the emergency
stop button is depressed and the key is removed. Turn the Maintenance Isolator
switch to position ‘0’ (OFF).
Brake off Brake on