Snorkel MB26 - Manual (Page 18)

2. Operation & Specifications
2 - 8
ITEMS NAMES FUNCTION
4 Steering Switch Turns the wheels left or right.
5 Selector Switch Pre selects Jib, Mast or Mast Rotate function.
6 Drive / Lift Selector Pre selects either drive or lift function.
7 Low / High Torque Selector
In drive function pre-selects low torque high speed
drive or high torque low speed drive, only functions
when mast and jib are down.
8 Horn Button Use to warn bystanders or to attract attention.
9 Low battery warning lamp
Illuminates when battery charge is low and machine
automatically switches into limp mode.
10 Overload warning lamp Illuminates when load in basket exceeds SWL
Table 2: Lower controls and Indicators
LOWER CONTROL PANEL
ITEMS NAMES FUNCTION
1 Emergency Stop
Push this red button at any time to isolate power.
Turn clockwise to reset.
2 Key Switch Selects Platform controls, OFF, or lower controls.
3 Rocker Switch
Activates the Pre-Selected operation, in either
direction.
4 Selector Switch Pre-selects Jib, Mast or Mast Rotate function.
5 Enable Switch
This Switch Enables the rocker switch and must be
held up during operation.
6 Hour Meter / BCI
Displays total run time of the machine and an
indication of remaining battery capacity.